Injin UD Tef ɗin Crossply na atomatik don 4UD

Akwai nau'ikan injuna da yawa waɗanda za su iya yin laminate na mayafin digiri 0 da digiri 90 na UD tare. Yayin da mutane da yawa ke son hanyoyin sarrafa atomatik da na rage aiki, Injin Tape na UD na atomatik yana ƙara shahara. Wannan nau'in injin na iya sassauta mayafin digiri 0 da digiri 90 na UD tare da ƙarfin da ya dace, yanke mayafin digiri 90 na UD zuwa zanen gado sannan a danna kuma a laminate mayafin digiri 0 da digiri 90 na UD a cikin hanya ɗaya.

Injin Kuntai UD Tape Crossply wani nau'in injin laminating ne wanda ke laminating yadi ko wasu kayayyaki ta hanyoyi biyu. Ana amfani da shi sosai a cikin tsarin samar da 2UD/4UD/6UD da kuma wasu hanyoyin da suka shafi matsewa da laminating na kayan da ake ciyarwa a digiri 0 da digiri 90.

Idan an riga an yanke masakun UD ɗinku na digiri 90, za ku iya amfani da wannan na'urar tef ɗin UD da hannu wajen ciyar da zanen zanen UD na digiri 90. Yana da amfani kuma ana iya daidaita shi da tsarin sarrafa masakun UD ɗinku, ko dai don samfura masu laushi ko don samfura masu tauri.

1. Takaitaccen bayani game da tsarin
1) Wannan nau'in Injin UD Tape Crossply ya ƙunshi firam ɗin sassauta tashin hankali, na'urar hydraulic, na'urar sarrafa zafi, na'urar servo drive, na'urar watsa layi, da kuma na'urar jujjuyawar jan hankali;
2) Na'urar jujjuyawar 0° UD mai axis 3, mai iya ɗaukar na'urori UD guda 3 don kwantar da hankali;
3) Na'urar ciyar da masana'anta mai tsawon 90° UD tare da na'urar sarrafa tashin hankali da yanke takarda.
 
2. Matse ɓangaren
1) Ƙarfin silinda huɗu na hydraulic mai silinda 6000KN yana aiki akan teburin giciye na lamination mai girman 1700 * 1700mm, tare da haɗin HMI+PLC don sarrafa matsin lamba, hanzari, riƙe matsin lamba da sauran ayyuka.
2) Matsakaici mai zafi da ake buƙata don Injin UD Tape Crossply shine mai zafi, wanda aka sanye shi da na'urar dumama mai amfani da injin dumama mai zagaye biyu na waje.
 
3. Jagora da kuma juyawa
Ana jan samfurin da aka laminated ta hanyar servo rollers don cimma ingantaccen ƙayyadaddun bayanai na tsayi kowane lokaci, kuma a haɗa shi da na'urar haɗa ƙarfi don cimma na'urar haɗa UD.

4. Sashen lantarki
1). Babban kabad na kula da wannan nau'in Injin UD Tape Crossply an sanya shi a gefen dama na tsakiyar injin (wanda mai siye zai tantance a wurin);
2). Mai siye zai kammala kayan shigarwa da gina kayan aiki a wurin, kuma mai samar da kayan zai samar da layin siginar mai shigar da injin servo;
3). Yanayin sarrafawa na motar AC shine mai karya da'ira + mai hulɗa + mai kare zafi + motar;
4). Duk fitarwa na PLC ana sarrafa su ta hanyar relay na matsakaici don aiwatar da abubuwan haɗin gwiwa;
5). Duk da'irori masu haɗawa suna da kariya daga masu katse wutar lantarki ko fiyus;
6). Tsarin tsarin sarrafa wutar lantarki ya rungumi tsarin "HMI+PLC". Bayanai daban-daban game da kayan aiki da kayan aikin sarrafa wutar lantarki, kamar aiki, yanayin aiki, kurakurai, lambobin sadarwa na taimako, lambobin sadarwa na jigilar kaya na kariya, iyakoki, makullan kariya na aminci, da sauransu, an haɗa su da PLC, kuma duk dabarun sarrafawa da lissafin tsari ana kammala su ta PLC.

Amfani da Amfani da UD Prepregs

- Tsarin da sassan jirgin sama da sararin samaniya (aerospace)

- Ruwan wuta don injinan iska

- Sassan motoci da kayan haɗin

- Kayan wasanni na nishaɗi

- Tsarin masana'antu da sassa

- Soja (2UD/4UD/6UD/8UD)

- Ƙarfafa Farar Hula da Gine-gine

Na'urar Cike da Injin UD Tef Ta atomatik: Fim ɗin Kariya, Akwatin Plywood, da sauransu.

Injin UD Tef ɗin Crossply Na atomatik a Waje: Fitar da Kwantenar Fitarwa

◆ Injinan an cika su da fim mai kariya kuma an ɗora musu akwati na fitarwa;

◆ Kayan gyara na tsawon shekara ɗaya;

◆ Kayan aiki